Superwinch Front Mount Electric Winch Wiring Installation - 2003 Ford F-250- Video

Today on our 2003 Ford F-250 we'll be installing the Superwinch Front Vehicle Electric Winch Wiring Harness, Part Number SW2007. In today's video we'll be using the Superwinch Talon 12.5-I, Part Number SW1612210. Now we'll begin here on the winch. We're going to need to remove the cover that covers up the center solenoid section. We'll need to remove these 4 allen head bolts right here up underneath the cover. Once these are done we'll need to remove 2 more allen head bolts here on the end as well as 5 phillips head screws up underneath that will allow us to remove the cover and gain access to the bolt that holds the red wire, or the positive wire, on the solenoid side. We'll be removing the red wire which is the positive wire. more

Watch Video

1/20/2014 12:00:57 PM

Superwinch Talon Winch Installation - 2003 Ford F-250- Video

Today on our 2003 Ford F250 well be installing as well as going over the operation of the Superwinch Talon Series 12.5 I Winch part number SW1612210. The Superwinch can be installed permanently in a fix mounted location and you will not need to change the wiring on the winch. Now for our application today well be showing you how to use it with the Curt Trailer Hitch Electric Winch Mount Plate as well as the Superwinch Electric Wiring Harnesses for both the front and the rear of the vehicle which allows us to use the Curt Trailer Hitch Electric Winch Mount Plate which is part number C31010 as well as the handles for the Winch Mount Plate which are part number C31005. You may also notice some of the wires that come out of the top of the winch are a little bit different. Thats because this winch has been wired to accommodate the Front Vehicle Electric Winch Wiring Harness which is part number SW2007 as well at it also works with the Rear or the Trailer and Vehicle Electric Winch Wiring Kit from Superwinch part number SW2008. In both of those kits you will actually remove the ground and the red or the positive wire from the winch and youll replace them with parts from their kit. Were going to need to remove the cover that covers up the center solenoid section. Now depending on your winch the removal of the cover to get the positive side off might be a little bit different than ours, but for ours we need to remove a couple bolts here that hold the cover on and gain access to the bolt that holds the red wire or the positive wire on the solenoid side. Next well go ahead and fish the red wire out of the grommet here. Once we pull the red wire out well go ahead and fish our new positive side through the grommet into the area where well be making our connection. more

Watch Video

1/9/2014 4:17:36 AM

Superwinch Electric Winch Wiring Kit Installation - 2003 Ford F-250- Video

Today on our 2003 Ford F-250, we will be installing the Superwinch Trailer and Vehicle Electric Winch Wiring Kit for up to 16,500 pound winches, part number, SW2008. In today's video, we'll be using the Superwinch Talon 12.5i, part number, SW1612210. We're going to need to remove the positive and the negative wire off of the winch itself and replace it with a short leads that come with the kit. Now, it's a good idea on your quick disconnect plug to go ahead and mark the ends of the wires that way you don't accidentally mix them up. Put a positive for the positive side as well as a dash for the negative side.Now, depending on your winch, the removal of the cover to get the positive side off might be a little bit different than hours. But for ours we'll need to remove these 4 Allen head bolts right here up underneath the cover. more

Watch Video

1/8/2014 10:35:44 AM

Curt Trailer Hitch Electric Winch Mount Plate Installation - 2003 Ford F-250- Video

Speaker: Today, on our 2003 Ford F-250, well be installing the Curt Trailer Hitch, electric winch mount plate part number C31010. In conjunction with the winch mount plate, well also be installing the Curt Trailer Winch mount handles part number C31005. The winch mount plate accommodates many different sizes as well as styles of electric winches. For todays purposes, well be installing the Superwinch Talon 12.5i winch. This is part number SW1612210. To begin with, were going to go ahead and put the winch mount plate into the rear receiver on this vehicle. Well then go ahead and put the pin and clip in place. more

Watch Video

1/7/2014 3:00:31 PM

Superwinch Electric Winch Wiring Kit Installation - 2004 Ford F-250- Video

All right, today in this 2004 Ford F250 were going to install part number SW2008 from Superwinch. This is our wire harness for the back of the truck. Well go ahead and mark the ends of our cable. Well go ahead and pair the end with the gray connector to see which is positive and negative and well go ahead and mark the ends. Well go ahead and take our two 5-ft long wires with the gray connector and well route those from the front of the vehicle to the battery. Weve got one wire in and well go ahead and repeat the same process with the other wire. more

Watch Video

6/14/2013 8:40:32 AM

  1